Tap Replacement in Alderley
From the 1890s timber cottages to the station-side townhouse rows, homes here ask very different things of the same fitting. Tap replacement in Alderley covers choosing a tap that suits your basin or bench, connecting the hot and cold lines, and testing everything before we pack up. Every job is done by a licensed plumber as part of the full plumbing service we run across Alderley.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
A drip on its own is a tap repairs job. A running or blocked toilet belongs on our toilet repairs page, and the wider tap and toilet plumbing list shows everything else we fit and fix.
Mixer Taps and Separate Taps Compared
A mixer blends hot and cold water at one spout and runs off one lever or twin handles, while separate taps give each supply its own outlet. Neither style wins on its own; what your basin already has decides the choice. A replacement tap has to match three things before anything comes off the shelf:
The holes
The number and spacing of the holes in the bench or basin set which taps will fit.
The mounting
A deck-mounted tap sits on the bench, while a wall-mounted one draws water from pipework inside the wall, so swapping between the two changes the wall or the basin, not just the tap.
The connections
The supply lines beneath decide how the new fitting hooks up. An isolation valve on each line closes off that one fitting without stopping the whole house's water, and we check the old fitting before you choose the new one.
Tap Washers, Whole Taps and the Licence Line
Queensland puts a whole tap swap with licensed plumbers, and the QBCC's home owner guide names it as work a resident cannot do. The single tap job outside that rule is renewing the internal washer or jumper valve, which the QBCC lists as unregulated work, though the finished job still needs to meet the standards.
The paperwork splits two ways:
A like-for-like swap
counts as minor work. A QBCC licensee handles it, without a permit or a Form 4.
An extra tap, or one in a new spot,
is notifiable work in an existing building. No council permit applies, but the plumber files a Form 4 with the QBCC within 10 business days of finishing.
Rentals add a layer. A tenant needs the owner's or agent's approval in writing, on a Form 23, before attaching any fixture, and a manager cannot refuse that request unreasonably.
Where a tenant fits something without consent, the owner has three options. They can treat it as a breach and try to sort the dispute, accept the fitting as an upgrade, or remove it and pass the removal costs to the tenant.
WaterMark and WELS on a New Tap
WaterMark certification is the proof that a plumbing product meets the safety and fitness-for-purpose rules of Australia's plumbing code. WELS, short for Water Efficiency Labelling and Standards, registers a tap and supplies its star rating and flow figures. A tap needs both before the law lets a licensed plumber fit it, and the packaging has to display the WaterMark trademark and the WELS label.
Buying online has its own checks. A listing has to show the product specification, the licence number and the WELS registration details, and both product databases can be searched by model before you buy. A seller can fill any gaps you spot.
One Queensland quirk: Business Queensland sets a 3-star WELS floor for showerheads and tap fittings, and exempts renovations. A straight swap on an older basin here isn't held to that figure.
Tap Type, Access and Paperwork Behind the Quote
The quote reflects the tap you pick and whether the isolation valves and connections beneath can be reused. It also covers whether the existing holes take the new fitting, and how easy the reach is under the basin or bench. A vanity squeezed into a station-side townhouse takes longer to work in than an open cottage laundry out towards the Alderley Arms Hotel, and the price follows the time.
A new or relocated tap adds a Form 4 lodgement fee, which the contractor pays and may recover from the owner. No dollar figure belongs on this page; the fixed quote before any work starts sets the price.
The 9 Litres per Minute Rental Tap Rule
Before an owner can pass all water charges to a tenant, the cold taps inside the home, and any single mixer, cannot push past 9 litres a minute. The limit reaches the taps over a basin, a kitchen sink or a laundry tub, and it leaves out the bath, the garden tap and anything supplying an appliance such as a washing machine.
Plenty of homes here rent rather than sit with their owners, so many of these swaps happen on an owner's instructions. The Residential Tenancies Authority recommends owners keep plumbing reports, receipts, packaging and manuals as proof their taps meet the mark.
How Your Tap Replacement Visit Runs
- 1
Tell us what's happening
Call (07) 3523 6417 or send the form with a few details about the problem in Alderley. A clear description helps us bring the right parts.
- 2
We measure up and swap the tap
We shut the isolation valves, check the holes, the mounting and the supply lines against the new fitting, then connect it and run both flows to test for drips before we pack up.
- 3
Approve a fixed price
You get a fixed quote before any work starts, with flat-rate pricing and no hidden fees. Nothing goes ahead until you say yes.
- 4
Pay when it's finished
Pay by card or EFTPOS on site once the job's done, or ask about Fix now, pay later.
Plumbing job in Alderley?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Replacement Questions From Alderley Homes
Call (07) 3523 6417Can I replace a tap myself in Alderley?
No, a full tap swap takes a licensed plumber in Queensland. The only tap task a resident may do is fitting a new washer or jumper valve inside the existing fitting, which the QBCC treats as unregulated work that still has to meet the standards.
How much does it cost to replace a tap?
Two factors carry the most weight: the tap you choose, and whether the existing shut-off valves and supply lines beneath can be kept. The written quote you approve before we start confirms the price.
Does a tap replacement in Alderley need a permit or Form 4?
A like-for-like swap is minor work, so no permit applies and no Form 4 goes in. An extra tap, or one in a new spot, is notifiable work: no council permit, but the plumber files a Form 4 with the QBCC. A permit is needed where several dwellings share a drain or the property runs dual reticulation.
What is the tap flow limit for rentals?
Cold taps inside a rental, and any single mixer, are capped at 9 litres a minute before the owner can pass the water bill to the tenant. The check reaches the basin, kitchen and laundry taps, and skips the bath, the garden and appliance taps.
Can a tenant replace a tap in an Alderley rental?
No, the swap is licensed work, so the owner or agent handles the booking. A tenant wanting to attach a fixture needs the owner or agent to approve in writing on a Form 23, which should not be knocked back unreasonably.
Call Alderley Plumbing Services to Book Your Tap SwapWe'll call you back.
Ring (07) 3523 6417 and tell us what's wrong. You get $0 call-out fees, a fixed quote before any work starts and same-day where we can, 7 days a week.
To claim your $0 call-out fee, call (07) 3523 6417 today.